OEM Available CE Certificated Automatic Entriance Rfid Access
Control Swing Barrier Gate
Introduction:
swing barrier gate offer a reliable and efficient method to ensure
only authorized users are allowed access to each area of a
building. It is an attractive swing turnstile that is easily
capable of handling high volume and abusive conditions. The compact
unit makes it simple to construct a multiple lane set-up while the
variety in colors allows you to match this turnstile perfectly to
your lobby or branding.
FEATURES AND FUNCTIONS:
swing barrier gate is a stainless steel swing turnstile with
innovate design, high quality and fast controlling for entry and
exit. It can be controlled by RFID, barcode, fingerprint and facial
verification device. The data transfers by TCP/IP or RS-485. It's
good for management of people's entry and exit in school, office,
gym, residential, supermarket etc.
1.Within direction indicator to show the current status of the
passage to pedestrians, guide pedestrians to pass correctly and
quickly
2. Within automatic power-off function when the system is powered
off, the access gate is opened to form a barrier-free access
3. Using several pairs of infrared sensors to prevent pedestrians
from illegally entering the passage, protecting pedestrians from
passing the passage smoothly and preventing trailing functions.
4. Within automatic reset function, after reading the card, if the
pedestrian does not pass within the time specified by the system,
the system automatically cancels the permission of this pass, and
the reset time value can be set online.
5. There is a LED indicator light on the cover of the box. When the
valid card is swiped, there will be a green arrow to indicate the
direction of passing;
Standard functions & features of Swing Turnstiles Gate
| 1. | Infrared sensor to prevent pinch pedestrians. |
| 2. | Alarm function, in case of illegal intrusion and reverse intrusion. |
| 3. | Anti-breakthrough function. The gate is locked automatically until
opening signal received. |
| 4. | Anti-trailing function, the turnstile will lock if someone wants to
burst in without swiping the RFID card. |
| 5. | The whole system runs smoothly, long-life performance, high
operation dependability and fast response. |
| 6. | Automatic reset function. If the user fail to pass within the
prescribed time (default time is 5 seconds), the system will cancel
the authority of the current user automatically. |
Adaptive Place
1. Office: Business Building, Government Office, Etc.;
2. Business Services: Supermarkets, Shopping Malls, Hotels, Clubs,
Banks, Etc.;
3. Leisure And Entertainment Venues: Parks, Scenic Spots, Amusement
Parks, Etc.
4. Transport Site: Bus Station, Railway Station, Subway Station,
Airport And So On.
5. Science And Education Unit: Colleges And Universities, Research
Institutes, Libraries, Etc.;
SPECIFICATIONS:
Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
Thickness of ply | 1.5mm |
Finish | brushed surface, polishing surface |
Shell's size (L*W*H) | 1200*280*980mm |
Swing arm material | Tempered glass or Acrylic (optional) |
Stretching out swing length | 260mm~600mm |
The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
Machine center | Germany technological motor |
Power voltage | AC220V±10%, 50Hz±10% |
Driver motor | DC36 servo motor |
Main-board voltage | 12V DC |
In-built Infrared | 4 pairs/passageway |
Passing speed in normally open mode | 50 persons/min |
Passing speed in normally closed mode | 40 persons/min |
Passage Width | 600mm |
Swing arm transmission angle | 180° |
Swinging direction | unidirectional or bi-directional |
Opening / closing time | 1 seconds |
The time required to running state after power on | 3 seconds |
Automatic reset time after the failure | 1 seconds |
Mean time to failure | min. 10 000 000 |
Operation temperature | -10℃ ~ +70℃ |
Relative humidity | less than 95% not condensed |
Working Environment | Indoor/Outdoor (with rain-tent cover) |
Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
Working types
In the swing gate products, there are three working types for users
to choose at the entrance and exit: controlled
passing, free passing and no passing. Namely there are nine working
types for users to choose for one lane in
open status and normal close status:
1) Controlled at both entrance and exit: it needs to read card to
pass through at both the entrance and exit;
2) Controlled at entrance, free at exit: it needs to read card at
entrance, and it does not need to read card at
exit to pass through;
3) Controlled at entrance, no passage at exit: it needs to read
card at entrance, and no one can pass through at
the exit;
4) Free at entrance, controlled at exit: it does not need to read
card at entrance to pass through, and it needs to
read card at exit to pass through;
5) Free at entrance, free at exit: it does not need to read card at
entrance and exit to pass through;
6) Free at entrance, no passage at exit: it does not need to read
card at entrance to pass though, and no one is
allowed to pass through at exit;
7) No passage at entrance, controlled at exit: no one is allowed to
pass through at entrance, and it needs to
read card at exit to pass through;
8) No passage at entrance, free at exit: no one is allowed to pass
through at entrance, and it does not need to
read card at exit to pass through;
9) No passage at entrance, no passage at exit: passage is cut off,
and on one is allowed to pass through at both
entrance and exit;
