Full Automatic IR Sensor DC 24V Gym Turnstiles Automatic Barrier
System
Gym Supermarket Swing Gate Full Automatic IR Sensor Control
Turnstiles Pedestrian Barrier Gate Stainless Steel Barrier
swing speed gate is an automatic motorized stainless steel tubular
swing barrier. Swing barrier has smallest
installation footprint while offering widest opening clearance to
allow big boxes, trolley, wheelchair, baby
stroller or user with big luggage to pass through with comfort.
Safety Features
Barriers swing automatically during emergencies (Optional with
control board and battery).
Smooth and quiet operation and without exposed screws.
Durable electrical components
Ergonomic design allows card & fingerprint authentication faster &
simpler for users.
Main Functions and Features of the System
1 Rapid identification technique, available to identify accurately
and efficiently the magnetic card, bar
code card, ID card and IC card.
2 DC Brushless Motor, Maintenance Free
3 On-line or off –line mode(optional)
4 Real time trouble self-detect and alarm indication, ensuring system
safe operation and facilitating
maintenance and operation
5 With direction indication, guiding passenger to entry and exit.
6 Self automatic locking to prevent forcely passing without the card
7 Automatic counting and displaying number of passenger, facilitating
observation and with a displaying
total amount as high as 90,000
8 Light and sound alarm indication function, preventing illegal entry
or irregular passing
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
| Thickness of ply | 1.2-2.0mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
STANDARD FEATURES & FUNCTIONS:
(1). Operation model: Both directions can be set as controlled mode
or free mode.
(2). NO mode & NC mode can be switched over by users easily &
freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and
personal injury.
(7). Emergency-escape function: the gates will open automatically
by pressing the emergency button which can be remote-controlled
whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(9). Equipped with free control software for machine interface &
control command SDK.
