Swing Gate 10mm Glass Turnstile Security Systems Manual Stainless
Steel
Pedestrian Barrier Gate Stainless Steel Swing Gate Turnstile
Security Systems Manual Stainless Steel Bi-Directional
Super width lane swing turnstile work as access control system, one
person per time, and alarm
on unauthorized intrusion and reverse intrusion. Its stable
performance and modern design make it quite
popular in some high-end environment such office buildings, banks,
private clubs, airports and other
places where access control is needed.
Speed Gate Main Functions:
1. Equipped with standard card read window, can be connect with multi
card-readdevice
2. With function of break down self check and alarm, easy maintenance
and operation.
3. Can be connected with external button or remote control. achieved
one or bi-direction passing at will
4. Auto reset function: If the passenger does not pass in given time,
arms will lock automatically,delay time
can be 3 s, 5 s, 10 s, 60 s..(given time can be set by operator).
5. Mechanical anti-trap: When people or objects hinder the arm
running, the system will automatically detect
and stop the run, swing arm strength of small, realize humanized
protection.
6. Can realize a normally open or normally closed function switched
by external button or remote control.
7. Lighting indicator : High brightness passing indication.
8. Normally open function:the arm will auto opening when power is
off. the direction can be adjusted.
9. Sound and light alarm function, including illegal traffic,
following, anti-trap etc.
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
STANDARD FEATURES & FUNCTIONS:
(1). Operation model: Both directions can be set as controlled mode
or free mode.
(2). NO mode & NC mode can be switched over by users easily &
freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and
personal injury.
(7). Emergency-escape function: the gates will open automatically
by pressing the emergency button which can be remote-controlled
whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(9). Equipped with free control software for machine interface &
control command SDK.
