Swipe Card Electronic Single Lane Swing Barrier Turnstile Entry
Systems
Swipe Card Access Control Electronic Fully Automatic Swing Barrier
Turnstile Gate Card Entrance Control Single Lane
Product Description
The swing gate realizes blocking and release by rotating and
swinging. The materials are commonly used in stainless steel,
plexiglass, tempered glass, and some also use metal plates
outsourcing special flexible materials (to reduce the damage to
pedestrians). It is mainly used for the management of entrances and
exits. The usual application places only allow people to pass, or
people who tow luggage, and people with disabilities. Considering
that swing gates can achieve wider channel characteristics than
wing gates. Most of the swing gate channels can be mixed with
pedestrians, bicycles, mopeds, disabled vehicles and other
non-motorized vehicles.
Standard product features:
1) It has fault self-test and alarm prompt functions, which is
convenient for users to maintain and use;
2) It has anti-clip and anti-collision functions, when the obstacle
is encountered during the reset of the swing arm, the motor
automatically stops working within the specified time, and resets
again after the default delay, and the force is small.
3) It has an anti-shock function. The swing arm is automatically
locked when no open signal is received;
4) It has one-way and two-way pendulum functions, which can realize
the control of the entry and exit of personnel in one direction or
two directions;
5) Remote control and management can be realized directly through
the management computer.
The swing gate realizes blocking and release by rotating and
swinging. The materials are commonly used in stainless steel,
plexiglass, tempered glass, and some also use metal plates
outsourcing special flexible materials (to reduce the damage to
pedestrians). It is mainly used for the management of entrances and
exits. The usual application places only allow people to pass, or
people who tow luggage, and people with disabilities. Considering
that swing gates can achieve wider channel characteristics than
wing gates. Most of the swing gate channels can be mixed with
pedestrians, bicycles, mopeds, disabled vehicles and other
non-motorized vehicles.
Features
1, Fault self-check and alarm prompt function, convenient for users
to maintain and use;
2, Through the built-in small button on the main control board, the
running status of the device can be programmed;
3, Mechanical structure, induction double anti-pinch function, when
the swing arm is in the process of resetting, it will automatically
stop or the motor will stop working within the default time, and
reset again after the default delay (until reset), and the force is
very small ( ≤2Kg);
4, Sound and light alarm function: including illegal entry and
trailing alarm;
5, Anti-shock function, the swing arm is automatically locked when
it does not receive the opening signal;
6, Swing lever (arm) synchronization function;
7, Automatic reset function. After opening the gate, if there is no
pass within the specified time, the system will automatically
cancel the user's permission to pass this time. The standard is
automatic reset 5 seconds after opening;
8, The channel automatically opens after power off, and
automatically closes after power on;
9, It can be connected to a variety of card readers, and can
receive relay switch signals to work;
10, One-way or two-way control of personnel entry and exit;
11, Remote control and management can be realized directly through
the management
Specification:
