Mechanism features:
1. Gear motor drives barrier gate bar slow start grind to a halt,
no- impact fast and steady movement, the operation range is limited
within 90 degree for the bar, with zero accident. Quiet operation,
noiseless, suitable for frequent raise and fall.
2. Precise automatic tracking balancing mechanism makes static
torque Zero for any position, which minimizes drive
3. power and prolong service life.
4. Barrier gate casing is made of advanced water-proof structure
and anti-aging spray treatment, durable.
Product Description
1. Barrier gate housing is cold-rolled steel plate, thickness of
2.0 MM, auto spray painting process;
2. 100W high-power pure copper motor, durable, strong power;
3. Motor with overheating protection could protect the motor avoid
damage. When power off can also be manually operation to guarantee
the vehicle pass in and out normally
4. Function of vehicle passing by the barrier arm automatically
drop down, support external loop detector and internal loop
detector.
5. Equipped with the infrared correlation Anti-hit device to
prevent the barrier drop down hit the pedestrians and cause an
accident;
6. Match loop detection protection device it can put an end to
smash the car caused by error.
7. With delay barrier drop down function, time is adjustable.
8. Can connect to open, close, stop port (switch signal) wire
control ,and remote control for customer optional.
9. With switch-off limit state output function equipped with
parking management system can accurately locate the vehicle pass in
and out.
10. Barrier arm diversification, standard length is 0~6 m optional,
maximum is 9 m,( more than 6 m need to customize), barrier arm
smoothly up and down, reliable, barrier go up and drop down just
need 6 seconds.(standard is 6S, fast speed is 3S, high speed is
2S).
11. According to user demand equipped with traffic light control
function;
Tech parameter
1. Size: 380*250*1010(mm),100KG
2. Work power: AC220V 150W
3. Raise and fall time: 3-6s ( adjustable)
4. Work temperature: 30degree below zero to 85 degree up zero
5. Barrier gate bar length: 3-6 meter ( optional)
6. Humidity: 5％~95％
7. Casing type: customized available
Material | 304 stainless steel | Input voltage | 220V AC220±10%, 150w |
Size | 380x250x1100mm | Barrier gate bar | 3-6m |
Net weight | 55kg/unit | Work temperature | -30 to 85 |
Motor | 24V DC brush | Humidity | 5 to 95％ |
Raise and fall time | 3-6s | Input interface | Relay signal, 12V level signal, |
Model | RS809 | Work environment | outdoor
|
Features:
1). Integrative machine core: all part is made by mold, so all
parts can be more accurate. And so the barrier gate can be much
more stable;
2). Left or right installed can be amendable. Customer can amend
install direction by himself;
3). Accurate link mechanism: link mechanism can release arm’s shake
and motor load, so the barrier gate can move more stable andbarrier
gate’s working life can be more longer;
4). 70W turbine worm transmission deceleration induction motor:
Drive Steady, Noise Lower, Structures Compact, can realize
self-locking.
Product performance characteristics
1. Material structure: The door body is made of high-quality
aluminum alloy. The structure of the door body is simple and
beautiful, the structure is compact, and the mechanical properties
and chemical composition of the material are in line with the
industry.
2. the sense of anti-mite: in the process of falling in the gate,
if the ground signal is received, it will automatically start the
rod, and the rod will not fall during the triggering period. After
the signal is restored, the gate will automatically fall to ensure
safety;
3. Overload protection: When the machine temperature reaches 110 °C
or the operation reaches the set time, the motor will stop working
and protect the service life of the motor.
4. Leakage protection: The product has leakage protection function,
which can over-current and over-voltage protection of the control
system.
5. Automatic stop: When the body is running, when the limit signal
is detected, the door will automatically stop running.
6. Installation environment: The product is suitable for
installation in the environment of community, factory, mine, cement
road and so on. (It can operate normally in wind, frost, rain and
snow).
