Bi Directional Intelligent Bridge Speed Gate Turnstile 304
Stainless Steel
Electronic Security Entrance Solution Speed Barrier Turnstile Gate
With Access Control System For Pedestrian Passing
Swing Barrier Turnstiles RS 716-2 are intelligent passage
management equipment researched,
developed and produced by our company. The equipment is integrated
with delicate mechanical
transmission, microprocessor control, and various read/write
techniques. It can be used for intelligent
control and management of the passage after equipped with different
read/write devices.
Function
1. Problem-self-checking function.
2. Many options of working ways: Bidirection card reading; One
direction card reading and another
no reading;
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can
be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-
height turnstile will cancel this passing right. And the regulated
time period for passing can be set by
managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get
back
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
STANDARD FEATURES & FUNCTIONS:
(1). Operation model: Both directions can be set as controlled mode
or free mode.
(2). NO mode & NC mode can be switched over by users easily &
freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and
personal injury.
(7). Emergency-escape function: the gates will open automatically
by pressing the emergency button which can be remote-controlled
whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(9). Equipped with free control software for machine interface &
control command SDK.
