304 Stainless Steel RS485 Speed Gate Turnstile Visit Management
System
Automatic High Level Automatic Fast Speed Lane Turnstile Speed
Barrier Gate For Hotel/Business Hall/Commercial
PRODUCT APPLICATIONS
Banks and insurance companies ,airports
Government buildings and instituations
Office buildings,head offices,administrative sites
Schools ,universities and colleges
PRODUCT DESCRIPTION
Hi-Speed Swing Gate is built with high torquebrushless motor; with
the advantage of low current consumption and low maintenance.
Speed of the motor (barrier) is easily adjusted with the
purpose-build main board.
Stainless steel cladding with aluminium end cover. The end cover
with Status Indication, is desgined to
accomodate various type of reading and scanner device.
The length of the pedestal can be lengthened to suit customer
request and site profile.
The top cladding can be raised and modified to accept embedded lift
display screen, face scanner post, etc.
STANDARD FEATURES & FUNCTIONS:
(1). Operation model: Both directions can be set as controlled mode
or free mode.
(2). NO mode & NC mode can be switched over by users easily &
freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and
personal injury.
(7). Emergency-escape function: the gates will open automatically
by pressing the emergency button which can be remote-controlled
whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(9). Equipped with free control software for machine interface &
control command SDK.
Standard Features & Functions
| 1. | Smooth operating motorized barriers, the entire system runs
smoothly, with a small noise and free of mechanical impact. |
| 2. | Extremely fast throughputs. |
| 3. | The fastlane turnstile system can easily integrates with the 3rd
party equipment, such as Biometric systems, consumption systems,
ESD system and access control system, etc. |
| 4. | Operation model: Both directions can be set as controlled mode or
free mode, two or one direction can be controlled by switch-button
or access controller. |
| 5. | Automatic check fault and alarm prompt function: to convenient for
users to maintain. |
| 6. | The running status of device can be set up through pressing the
built-in small keyboard of the main control board. |
| 7. | The device is locked until a valid open signal is received. |
| 8. | Emergency-escape function: When power off, it will be opened the
gates automatically to meet the request of fire protection. Also
the gates will open by pressing the emergency button which can be
remote-controlled whether the power is on or not. (Optional). |
| 9. | Remote control and management function: Through the management
computer to realize remote control and management. |
| 10 | Streamline small footprint design that utilizes shared cabinets for
multi-lane |
| 11 | LED indicator function: Traffic lights on both sides of the
turnstile barrier are the indicator of access status, When the
traffic lights show green, it means to pass and the red light means
no-entry. The traffic lights on both sides can be set to indicate
access for left or right or bi-direction. |
| 12. | Anti-pinch function: Auto-alarm will activate for unauthorized
pedestrian movement and tailgating. The barrier uses several photo
sensors to prevent turnstile closure on a person while inside the
lane. |
| 13. | Reset automatically function: ① the gates can locked automatically
when it be forcibly pushed 10 degrees. ② “Go” signal will be
cancelled if passage through is not completed within pre-set time.
The standard default is 10 seconds (time adjustable 1s ~ 60s, by
changing parameter of main control board). |
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
Functions:
1. Self-test and alarm function,user-friendly maintenance and use
;With automatic reset function,gate opening after a specified
period of time. If user does not pass,the system will automatically
cancel the user's current access permission; Auto-reset delay, the
standard automatic reset is after 10 seconds.
2. Through the main control on the half-built small-press
plate,Programmable devices show running status.
3. When valid card is read and passenger passed,arm can be delayed
to close from 1-10s which can be set on the control panel.
4. One-directional,bi-directional function.
5. Auto-reposition function:After card is read,if passenger does
not pass within regulated time period,swing gate will cancel this
passing permission,The regulated time period for passing can be set
by management.
6. If passenger passes without card being read or valid card
read,Swing barrier will alarm until passenger gets back from the
swing barrier and then uses a valid card to be read for passing.
7. Erosion control features,in the absence of gate opening signal
receipt,the arm will automatically be locked.
8. Anti-rush function:if there is no open signal arm will hold
tightly.
9. Adjustable arm swing synchronized (for the double pendulum
case).
10. Adjustable normally open or closed, in order to meet the
requirements of the different venues.
11. Connecting with a variety of reading devices which can be
linked to the receiving signal relay switch.
12. Swing gate is with RS485 interface for long-distance control
concern and the integration of various readers and writers.
Managing computer directly through the remote control and
management .
13. Auto power-off flap opening,power-on self-closing,Meets fire
safety requirements.
14. Double anti-clipping function: photocell anti-clipping and
mechanical anti-clipping.When passenger is going through the swing
barrier,photocell will detect this situation and will not close.
After passenger has passed,arm will close automatically. During its
reposition,if arm meets any obstacle,arm will get back
automatically or stop working for a while with very slight force.
Also it will alarm.
15. Direction display to guide passenger which direction to go.
16. Card-reading with memory or without memory function.
17. Swing barrier can control the population inside in the control
of software.
18. Stable running with little noise.
