304 Stainless Steel Security Bi-Directional Automatic Swing
Turnstile Barrier Gate With Access Control System
All-around Personal Safety Protection
Triple anti-clamping: Swing gate turnstile anti-clamping function is advanced
technology, including infrared anti-clamping, mechanical
anti-clamping and anti-collision by advanced electric current
detection, so as to protect personal safety of passengers more
comprehensively.
Anti-collision control: When the gates instantaneously encounter an impulse force that is
beyond the safety range, the gates can be slowly pushed slowly for
some distance to buffer the impact force towards mechanism and the
reversed impact force towards user.
Anti-electric shock: All electric modules are designed to operate under the safety
voltage of 24V, and configured with residual current protective
device to prevent pedestrian hurting from avoiding electric shocks.
Turnstile opens when power failures: CMOLO adopts advanced Power-off Auto-Open Technology. When power
is off, turnstile system will automatically unlock the gates, which
can be manually pushed to be open state, so as to evacuate people
in the event of an emergency.
Emergency open: Equipped with emergency escape control device, turnstile system
will automatically open the gates to evacuate people.
Features
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One
direction card reading and another no reading; One direction card
reading and another freely. And single direction photocell
controlled passing and close. Working ways can be set in the
control panel.
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right. And the regulated time period for passing can
be set by managers.
6. If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the Swing barrier
and then take a valid card to be read for passing.
7. Swing barrier is with 485 interface for long-distrance control
concern.
8. Anti-rush function: If there is no open single, arm will be
holding tightly.
9. Double anti-clipping function: Photocell anti-clipping and
mechanical anti-clipping. When passenger is going through the Swing
barrier, photocell will detect out this situation and will not
close. After passenger passed, arm will close automatically. During
its reposition, if arm meets any obstacle, arm will get back
automatcially or stop working for a while with very slight force.
Also it will alarm.
10. Swing barrier is with standard electrical interface for the
integration of various readers and writers.
11. Swing barrier can count how many passenger has passed and will
show it in the LED display.
12. Direction display to guide passenger which direction is to go.
13. Card-reading with memory or without memory function.
14. Swing barrier can control the population inside in the control
of software
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1300*150*990mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 4 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
| Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
STANDARD FEATURES & FUNCTIONS:
(1). Operation model: Both directions can be set as controlled mode
or free mode.
(2). NO mode & NC mode can be switched over by users easily &
freely.
(3). Tailgating-detection function.
(4). Intruding-alarm function.
(5). Delayed reset automatically function.
(6). Anti-pinch function: protection against finger entrapment and
personal injury.
(7). Emergency-escape function: the gates will open automatically
by pressing the emergency button which can be remote-controlled
whether the power is on or off.
(8). With interface of relay switch (the dry contact signal or +12V
electrical level signal or DC12V pulse signal of pulse width ≥
100ms, driving current ≥ 10mA), compatible with all kinds of access
controllers.
(9). Equipped with free control software for machine interface &
control command SDK.
