Pedestrian Swing Gate Barrier System Digital Optical Barrier
Turnstile Controlled Acrylic / Tempered Glass
FEATURES AND BENEFITS
• Use IC cards, ID cards, Bar code or magnetic cards as automatic
identification system and achieve access, attendance fees or
function
• A direction indicator, showed that pedestrian access to the
current status of, and guide pedestrians correct and smooth passage
• Display has been in use for statistics and numbers
• With voice and strobe light alerts
• A combination of infrared sensors and police ant illegal entry
into pedestrian access, the protection of pedestrians smooth and
the prevention of the channel following
• Double anti-clipping function, photocell antic lipping and
mechanical anti-clipping
• Auto re-set function, if no passing during identified
card-reading time, the system will reset automatically the
passengers are prohibited to pass until their second identified
reading
• The barrier can be set to delay closing in 1-60s after a valid
card-reading
OPERATING MODES
• Single passage in the set direction
• Bi-directional single passage
• Free passage in the set direction
• Always free or locked
Adaptive Place
1. Office: Business Building, Government Office, Etc.;
2. Business Services: Supermarkets, Shopping Malls, Hotels, Clubs,
Banks, Etc.;
3. Leisure And Entertainment Venues: Parks, Scenic Spots, Amusement
Parks, Etc.
4. Transport Site: Bus Station, Railway Station, Subway Station,
Airport And So On.
5. Science And Education Unit: Colleges And Universities, Research
Institutes, Libraries, Etc.;
SPECIFICATIONS:
Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or
paint (optional) |
Thickness of ply | 1.5mm |
Finish | brushed surface, polishing surface |
Shell's size (L*W*H) | 1400*150*990mm |
Swing arm material | Tempered glass or Acrylic (optional) |
Stretching out swing length | 260mm~600mm |
The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
Machine center | Germany technological motor |
Power voltage | AC220V±10%, 50Hz±10% |
Driver motor | DC36 servo motor |
Main-board voltage | 12V DC |
In-built Infrared | 4 pairs/passageway |
Passing speed in normally open mode | 50 persons/min |
Passing speed in normally closed mode | 40 persons/min |
Passage Width | 600mm |
Swing arm transmission angle | 180° |
Swinging direction | unidirectional or bi-directional |
Opening / closing time | 1 seconds |
The time required to running state after power on | 3 seconds |
Automatic reset time after the failure | 1 seconds |
Mean time to failure | min. 10 000 000 |
Operation temperature | -10℃ ~ +70℃ |
Relative humidity | less than 95% not condensed |
Working Environment | Indoor/Outdoor (with rain-tent cover) |
Input port | relay dry contact signal; +12V level signal, pulse width >100ms,
DC12V pulse signal |
Communications port | RS232/ RS485 electric standard, communications range ≤1200m.
Available to connect with external CAN BUS and Ethernet |
Unique Advantages of Outdoor Turnstile Gate
Protection level is IP65: outdoor turnstile gate is with the functions of strong
water-proof and dust-proof.
Shared use of pedestrian & cyclist: pedestrian, bicycle and motorcycle are allowed to pass through
the same passageway.
Sustain violent hitting on gates: the elastic swing gates created can sustain frequent violent
hitting. Within limited range of impact force, swing gates can
withstand 200KGF external hitting.
Resistant to sunlight interference: the infrared sensor structure is adopting matrix distribution and
anti direct sunlight design, which can reduce the interference from
sunlight to avoid false alarming.
Resistant to high & low temperature: outdoor turnstile gate can work normally when under ultra-high or
ultra-low temperature.
